通過式清洗機在工業清洗中扮演著重要角色，規范運行和注意關鍵要點，才能讓設備更好地發揮作用、延長使用壽命。

　　Through type cleaning machines play an important role in industrial cleaning. Standardized operation and attention to key points are necessary to enable equipment to better function and extend its service life.

　　運行前，需仔細檢查各部件狀態。先查看輸送系統的鏈條、網帶是否有松動、磨損，避免運行中工件卡頓或掉落；再檢查清洗槽內清洗液的液位和濃度，及時補充或更換，防止因清洗液不足影響清洗效果。啟動設備時，應先開啟輸送系統，確認運行平穩后，再依次啟動加熱、噴淋、循環等系統。運行過程中，要留意設備的運行聲音，若出現異常聲響，需立即停機檢查，同時觀察工件清洗情況，確保污垢被有效清除。

　　Before operation, carefully check the status of each component. First, check whether the chains and mesh belts of the conveyor system are loose or worn, to avoid workpiece jamming or falling during operation; Recheck the liquid level and concentration of the cleaning solution in the cleaning tank, and promptly replenish or replace it to prevent insufficient cleaning solution from affecting the cleaning effect. When starting the equipment, the conveying system should be started first, and after confirming smooth operation, the heating, spraying, circulation and other systems should be started in sequence. During operation, pay attention to the sound of the equipment. If there is any abnormal noise, immediately stop the machine for inspection and observe the cleaning of the workpiece to ensure that dirt is effectively removed.

　　使用過程中，有諸多注意要點。清洗液的溫度需根據工件材質和污垢類型合理調節，溫度過高可能損傷工件，過低則清洗效果不佳；定期清理過濾循環系統中的雜質，防止堵塞影響清洗液循環。此外，烘干系統要確保通風順暢，避免因熱量積聚引發安全隱患。操作人員還需做好防護措施，避免直接接觸高溫清洗液或化學藥劑。

　　There are many key points to note during use. The temperature of the cleaning solution should be adjusted reasonably according to the material of the workpiece and the type of dirt. If the temperature is too high, it may damage the workpiece, while if it is too low, the cleaning effect will be poor; Regularly clean the impurities in the filtration circulation system to prevent blockages from affecting the circulation of cleaning solution. In addition, the drying system should ensure smooth ventilation to avoid safety hazards caused by heat accumulation. Operators also need to take protective measures to avoid direct contact with high-temperature cleaning solutions or chemical agents.

　　通過式清洗機的正常運行離不開對細節的關注，只有嚴格遵循運行規范、把握注意要點，才能讓設備穩定高效地完成清洗任務。

　　The normal operation of the through type cleaning machine relies on attention to details. Only by strictly following the operating standards and grasping the key points of attention can the equipment complete the cleaning task stably and efficiently.

　　本文由 通過式噴淋清洗機 友情奉獻.更多有關的知識請點擊 http://m.chendakeji.cn  真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from the through type spray cleaning machine For more related knowledge, please click http://m.chendakeji.cn Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Stay tuned