使用高壓去毛刺清洗機實際上是一個柔和的處理過程，適合去除松散的毛刺、粘附的磨屑和拋光后殘留的特殊形狀毛刺等；另外還可去除深孔、盲孔、狹縫和小孔等難以或人工不能去除的孔內毛刺。并且不會損傷內表面。下面我們主要介紹一下使用高壓去毛刺清洗機時高壓噴嘴的結構形式選擇。

The use of high-pressure deburring cleaning machine is actually a gentle process, which is suitable for removing loose burrs, adhesive abrasive chips and special shaped burrs left after polishing; In addition, it can also remove the burr in the hole that is difficult or cannot be removed manually, such as deep hole, blind hole, slit and small hole. And will not damage the inner surface. Next, we will mainly introduce the structure selection of high-pressure nozzle when using high-pressure deburring cleaning machine.

一、去除深孔內的毛刺

1、 Deburr deep holes

使用高壓清洗機去除深孔內的毛刺時，我們可以把錐形的高壓噴嘴安裝到高壓管上，進行往復移動清洗。

When using the high-pressure cleaning machine to remove the burr in the deep hole, we can install the conical high-pressure nozzle on the high-pressure pipe for reciprocating cleaning.

二、去除交叉孔內的毛刺

2、 Deburr the cross hole

使用高壓清洗機去除交叉孔內的毛刺時，我們可用直線型噴嘴來解決，而扇形噴嘴負責零件外表面的毛刺清理。

When using the high-pressure cleaner to remove the burrs in the cross hole, we can use the linear nozzle to solve the problem, while the fan-shaped nozzle is responsible for the burr removal on the external surface of the part.

三、較大零件的表面毛刺

3、 Surface burr of larger parts

使用高壓清洗機去除較大零件的表面毛刺時，我們把每分鐘1500轉以上的強力旋轉噴嘴安裝在自動行走機構上，以完成對較大的磨削表面清理。

When the high-pressure cleaning machine is used to remove the surface burrs of large parts, we install a powerful rotating nozzle with a speed of more than 1500 rpm on the automatic traveling mechanism to complete the cleaning of large grinding surfaces.

四、較大的槍膛類零件毛刺

4、 Large burr of gun bore parts

使用高壓清洗機去除較大的槍膛類零件毛刺時，我們將不同朝向的多頭噴嘴組合在錐形噴嘴上，高壓噴嘴頭在往復移動時高速旋轉清洗。

When using the high-pressure cleaning machine to remove the burrs of large gun bore parts, we combine the multi-head nozzles with different orientations on the conical nozzle, and the high-pressure nozzle head rotates to clean at high speed when moving back and forth.

我們可以看出不同零件的結構形狀及要求決定了高壓噴嘴的數量、噴嘴配置以及噴射形式。為了使高壓噴嘴具有很強的適應能力，我們可以設計成活動式噴嘴，使它在一定范圍內可調。依據不同零件的結構形狀和尺寸，我們可采用兩種方法，一是高壓噴嘴固定不動，零件轉動或移動。二是零件固定不動，而高壓噴嘴移動或轉動。另外，我們還可配置多頭噴嘴或多噴管式可動噴嘴以提高生產率。更多相關內容就來我們網站http://m.chendakeji.cn咨詢！

We can see that the structural shape and requirements of different parts determine the number of high-pressure nozzles, nozzle configuration and injection form. In order to make the high-pressure nozzle have strong adaptability, we can design a movable nozzle to make it adjustable within a certain range. According to the structural shape and size of different parts, we can adopt two methods. One is that the high-pressure nozzle is fixed and the parts rotate or move. The other is that the parts are fixed while the high-pressure nozzle moves or rotates. In addition, we can also configure multi-head nozzle or multi-nozzle movable nozzle to improve productivity. Come to our website for more relevant content http://m.chendakeji.cn consulting service