通過式清洗機的使用用途、高壓泵容積、保養次數、操作的規范性等都影響到他的正常運行狀況。下面超聲波清洗機生產廠家來講講通過式清洗機的注意事項。

The use of the through type cleaning machine, the volume of the high-pressure pump, the number of maintenance, and the standardization of operation all affect its normal operation. Next, the manufacturer of ultrasonic cleaning machine will talk about the precautions of passing type cleaning machine.

1·當操作高壓清洗機時：始終需戴適當?shù)淖o(hù)目鏡，手套和面具。

1. When operating the high-pressure cleaning machine: always wear appropriate goggles, gloves and masks.

2·始終讓保持手和腳不接觸清洗噴嘴。

2. Always keep hands and feet away from the cleaning nozzle.

3·經常要檢查所有的電接頭。

3. Always check all electrical connectors.

4·經常檢查所有的液體。

4. Check all liquids frequently.

5·經常檢查軟管是否有裂縫和泄漏處。

5. Check the hose frequently for cracks and leaks.

6·當未使用噴槍時，總是需將設置扳機處于鎖定狀態。

6. When the spray gun is not used, always lock the setting trigger.

7·總是盡可能地使用低壓力來工作，但這個壓力要能足以完成工作。

7. Always use low pressure to work as much as possible, but the pressure should be enough to complete the work.

8·在斷開軟管連接之前，總是要先釋放掉清洗機里的壓力。

8. Always release the pressure in the washer before disconnecting the hose.

9·每次使用后總是要排干凈軟管里的水。

9. Always drain the water in the hose after each use.

10·決不要將噴槍對著自己或其他人。

10. Never point the gun at yourself or others.

11·在檢查所有軟管接頭都已在原位鎖定之前，決不要啟動設備。

11. Never start the equipment before checking that all hose connections have been locked in place.

12·在接通供應水并讓適當?shù)乃鬟^噴槍桿之前，決不要啟動設備。然后將所需要的清洗噴嘴連接到噴槍桿上。

12. Never start the equipment before turning on the supply water and letting the proper water flow through the gun barrel. Then connect the required cleaning nozzle to the spray gun rod.

注意：不要讓高壓清洗機在運轉過程中處于無人監管的狀態。每次當你釋放扳機時泵將運轉在旁路模式下，如果一個泵已經在旁路模式下運轉了較長時間后，泵里循環水的過高溫度將縮短泵的使用壽命甚至損壞泵。所以，應避免使設備長時間運行在旁路模式。

Note: do not leave the high-pressure cleaning machine unattended during operation. Each time you release the trigger, the pump will operate in bypass mode. If a pump has been operating in bypass mode for a long time, the high temperature of circulating water in the pump will shorten the service life of the pump or even damage the pump. Therefore, the equipment shall not be operated in bypass mode for a long time.

大多數清洗機的故障多發生在使用過程中，因此要想在根源上避免故障就應當在清洗機設備工作時堅持規范操作，隨時監測它的運行狀況。更多相關內容就來我們網站m.chendakeji.cn進行咨詢吧。

Most of the faults of the cleaning machine occur in the process of use. Therefore, to avoid the fault at the root, it is necessary to adhere to the standard operation during the operation of the cleaning machine and monitor its operation at any time. For more information, please visit our website m.chendakeji.cn.